Login to earn Reward Points for sharing!

Joyetech eVic Primo SE 80W Starter Kit with ProCore SE atomizer

ID sku:ZRR012693000002

qty: 26

weight: 0.45kg

Weight: 0.45kg

Sku: ZRR012693000002

Retail Price: $69.90

Promotion Price: $57.69 Free Shiping Worldwide

Discount: you save: $12.21 (17%)

Points: Earn 57 Reward Points

Color: Black Red Blue Silver Yellow
QTY:
26 pcs in stock

Having a large 0.96 inch OLED display and a new easy-to-go interface, the eVic Primo SE is such a compact starter mod that available in multiple attractive colors. Having a full glass tube with integrated design, the ProCore SE atomizer is such a delicate atomizer which is easy to get started. It features a bottom filling and airflow control system. ProC series heads offers a plenty of choices, direct lung or mouth to lung, for massive vapor production and optimal flavor. The eVic Primo SE reaches a formidable 80W power along with a sequence of unique features including 2A quick charge, real-time clock, custom logo preheat and timeout protection. It's simplicity and modesty will surely satisfy you on a daily basis.

Full glass tube with elegance: The ProCore SE atomizer uses a full glass tube, integrating the mouth piece and venting system into one. Clean and tight.

Less is more: The eVic Primo SE shares the same elegance and reliability but compromising the size greatly compared to its predecessors, making it really comfortable to hold and vape.

Power your day: The eVic Primo SE is powered by one 18650 high-rate cell. It features a bottom battery lid which is flexible to change. With 80W max output, it can satisfy you for your daily vaping.

Balanced flavor and clouds: The bold airflow structure on the ProCore SE atomizer was designed to deliver massive vapor production without compromising its optimal flavor using with the ProC series heads.

Applicable for various tanks: The exquisite spring loaded 510 connector of the eVic Primo SE is applicable for tanks with 510 length ranged at 4.0mm to 5.5mm. Tanks are also free to go up to 25mm diameter as you prefer.

Quick charge system: The eVic Primo SE has 2.0A maximum charging current with which it can get fully charged more quickly than normal ones when using with the Avatar quick charger (sell separately).

Onboard reverse polarity protection: The onboard reverse polarity protection protects the device from damage in the event of reverse battery installation.

Dual circuit protection: eVic Primo SE applies two sets of battery protection circuit system, realizing overall battery protection of over-charging, over-current and over-discharging, which makes it more safe and reliable.

Color your vaping life: Available in 5 attractive colors, the eVic Primo SE makes your daily vaping interesting and colorful.

Refill with ease: Put the glass tube upside down and inject the e-liquid intot he slot directly. Don’t fill too much to avaoid over-flown.

Upgradeable firmware: eVic Primo SE comes with the upgradeable firmware. Having the latest firmware, real-time clock, preheat, custom logo, and reverse charging are all available.

Charging: Please always use high-rate 18650 cell. The eVic Primo SE adopts new equalizing charge system which supports quick charge capability with max charging current up to 2.0A. You can also take out the cells and charge them in a stand alone charger.


Joyetech eVic Primo SE 80W Starter Kit with ProCore SE atomizer Features & Spec:
Size: 25.0mm(W)*39.0mm(L)*117.5mm(H)
Colors: silver, black, red, yellow, blue
E-liquid capacity: 2ml
Applicable heads: ProC series heads
Output range: 1-80W
Output modes: Power/Bypass/Temp(Ni, Ti, SS316)/TCR(M1, M2, M3)
Resistance range: 0.05-1.5ohm for Temp/TCR mode
0.1-3.5ohm for Power/Start/Bypass mode
Temperature control: 100-315°C/ 200-600°F
Depth of 510 pins applicable: 4.0-5.5mm
Battery using: high-rate 18650 cell (continues discharge current 25A)
Max charging current: 2.0A
Max output current: 30A
Features: OLED display, small and exquisite, 2A quick charge, multi protections, real-time clock, preheat function, custom logo

Joyetech eVic Primo SE 80W Starter Kit with ProCore SE atomizer Package:
1 * eVic Primo SE Mod(no cell)
1 * ProCore SE atomizer
1 * ProC1 (0.4ohm) head
1 * ProC1-S (0.25ohm) head
1 * Silicon band
1 * QC USB cable
2 * Manual
1 * Warranty card
2 * Warning card
Spare parts

Recommend Products:
Joyetech Vape
Joyetech eGo AIO ProBox 2100mAh starter kit
REV Nitro 200W Mod

Write Your Own Review
You're reviewing:Joyetech eVic Primo SE 80W Starter Kit with ProCore SE atomizer
Your Rating
Contact US
Jot us a note and we’ll get back to you as quickly as possible.