Joyetech CUBOID TAP 228W Box Mod
Retail Price: $99.00
Discount: you save: $62.15 (63%)
Introducing the much anticipated CUBOID TAP 228W Box Mod furnished with Joyetech TAPTECTM technology. We creatively developed the TAP buttons, paired with the pressure-sensitive system and vibration motor. It is powered by dual replaceable 18650 cells with which you can fire it up to the ultra 228W. CUBOID TAP is backed with upgradeable firmware and multiple functions such as 2.0A quick charge, 1.3 inch OLED display, clock, custom logo, preheat and reverse charging. With the new TAP buttons, the CUBOID TAP will redefine what you can expect out of your vaping.
Pressure-sensitive capability applied: Thanks to the advanced technology in our time. The CUBOID TAP adopted the pressure-sensitive system inside, with which you can active the menu by clutching the device in sequence.
Power on condition:
3 times to lock/unlock tap buttons
4 times to activate the menu
5 times to turn stealth on/off
Power off condition:
3 times to set TCR value
4 times to turn screen upside down
5 times to check battery voltage
Vibrates once taps: The vibration motor is built in such a way that it is partially off-balanced. Once you tap the panel, it vibrates to indicate that the adjustment is made.
228W with 50A maximum output current: The CUBOID TAP is powered by dual 18650 high-rate batteries where max output can be reached to 228W. It offers more possibilities when using various coils with its 50A maximum output current.
Equalizing charge system: Equalizing charge technology was applied in order to bring all cells to an equal state of charge.
Power bank for reverse charge: The CUBOID TAP can be served as a power bank to charge other e-cigarettes or electronic devices. Install the new reverse charging adapter (sell separately) on the 510 connector.
Onboard reverse polarity protection: The onboard reverse polarity protection protects the device from damage in the event of reverse battery installation.
Dual circuit protection: It applies two sets of battery protection circuit system, realizing overall battery protection of over-charging, over-current and over-discharging, which makes it more safe and reliable.
Applicable for various tanks: The exquisite spring loaded 510 connector of the CUBOID TAP is applicable for tanks with 510 length ranged at 4.0mm to 5.5mm.Tanks are also free to go up to 25mm diameter as you prefer.
Upgradeable firmware: CUBOID TAP comes with the upgradeable firmware. Having the latest firmware, real-time clock, preheat, custom logo, and reverse charging are all available.
Charging: Please always use married high-rate 18650 cells, don't mix with different brands. The CUBOID TAP adopts new equalizing charge system which supports quick charge capability with max charging current up to 2.0A. You can also take out the cells and charge them in a stand alone charger.
Joyetech CUBOID TAP 228W Box Mod Features & Spec:
Output mode: Power/Clock/Temp (Ni, Ti, SS316)/TCR (M1/M2/M3)/USB Charge mode
Features: TAPTECTM, pressure-sensitive, vibration motor, 2A QC, power bank, preheat, custom logo, real-time clock
Output range: 1-228W
Depth of 510 pins applicable: 4.0-5.5mm
Resistance range: 0.05-1.5ohm under Temp/TCR mode , 0.1-3.5ohm under Power/Clock mode
Temperature control: 100-315°C/ 200-600°F
Battery using: dual married high-rate 18650 cells(continues discharge current >= 25A)
Max charging current: 2.0A
Max output current: 50A
Joyetech CUBOID TAP 228W Box Mod Package:
1 * CUBOID TAP (no cell)
1 * QC USB cable
1 * Manual
1 * Warranty card
1 * Warning card