Eleaf iStick Tria 300w Kit with 2ml ELLO S Tank
$59.79 $69.89 Free Shipping Worldwide
Discount: you save: $10.10 (14%)
The iStick Tria, a new powerful mod by Eleaf, accepts triple 18650 batteries and is capable of firing up to 300W, allowing a much more massive vapor production than ever. The overall compact profile and stylish visual appeal of the iStick Tria make this powerful vape mod stand out from others. The ELLO S atomizer features retractable top for easy e-liquid filling and comes with HW coils for great vaping experience with enhanced flavor. Having 0.91-inch screen, upgradeable firmware, 2A quick charge and reverse charge capabilities, this full-featured iStick Tria with ELLO S is a must have vaping setup for cloud chasers.
Powerful Output of 300W: Powered by triple 18650 batteries, the iStick Tria is capable of outputting a maximum power of 300W, providing you with a large amount of vapor production.
0.91-Inch Screen with Triple Battery Bars: The iStick Tria comes with a 0.91-inch screen that offers a concise and clear interface with 3 separate battery bars, allowing you to know which battery needs to be charged or exchanged.
Stay Stylish and Modern: The overall compact profile and stylish visual appeal of the iStick Tria make this powerful vape mod stand out from others.
Easy to Clean: All parts of the ELLO S tank can be detached and reassembled, much more convenient to clean.
Convenient Retractable Top Fill: To fill the ELLO S tank, you just need to slide the top cap with drip tip back to reveal the fill port.
2A Maximum Charging Current for Quick Charge: With 2A maximum charging current, the batteries can be fully charged much more quickly.
Battery Balancing Trickle Charge System: A battery balancing trickle charge system is utilized in the iStick Tria to bring 3 batteries to the equal level charge, which also ensures high security in charging.
Powerful HW3 and HW4 Coils: The iStick Tria with ELLO S comes with powerful HW coils: HW3 Triple-Cylinder 0.2ohm Head and HW4 Quad-Cylinder 0.3ohm Head for cloud chasing.
Extendable for Larger E-liquid Capacity: To obtain larger e-liquid capacity of 4ml, simply replace the pre-installed glass tube with the other taller one and an extra air pipe that are both provided in the package.
Preheat Function & Switchable Interfaces: Preheat function allows the device to quickly heat up the coil at a higher wattage, providing you with a nice vaping experience. iStick Tria also has three switchable display interfaces for you to choose from: Puff interface, Second interface, and Current (amp) interface.
High Compatibility: The iStick Tria can handle tanks up to 25mm diameter without any overhang.
Dual Circuit Protection: The circuit protection system has both software and hardware battery protections of over-charging, over-current and over-discharging.
Reverse Polarity Protection: Reverse polarity protection is fully achieved by the application of special battery anti reverse circuit in the circuit board.
Reverse Charging Capability: With the Reverse Charging (RC) adapter (optional accessory), the iStick Tria will convert the 510 connection into a USB output for power bank mode, providing power to your cell phone or other e-cig device.
Functions of Micro USB Port: Charging: The 18650 batteries can be charged in the iStick Tria through the side USB port via wall adapter or computer or charged with an external battery charger.
Firmware upgrading: The firmware can be upgraded by connecting the device with a computer through the USB port via a micro USB cable.
Eleaf iStick Tria 300w Kit with 2ml ELLO S Tank Features and Specs:
Output wattage: 1-300W
E-liquid capacity: 2ml (Extendable to 4ml)
Maximum charging current: 2A
Maximum output current: 50A
Thread type: 510 thread
Battery type: high-rate 18650 battery
(Continuous discharge current should be above 25A)
Output mode: VW/TC(Ni,Ti,SS,TCR-M1,M2,M3)
Resistance range: 0.05-1.5ohm (TC modes), 0.1-3.5ohm (VW mode)
Temperature range: 100－315℃/200－600℉(TC modes)
Eleaf iStick Tria 300w Kit with 2ml ELLO S Tank Package Includes:
1 * iStick Tria (without batteries)
1 * ELLO S 2ml Atomizer(with HW3 Triple-Cylinder 0.2Ohm Head)
1 * Extra HW4 Quad-Cylinder 0.3ohm Head
1 * ELLO S 4ml Glass Tube
1 * Air Pipe
1 * Set Sealing ring
1 * QC USB cable
2 * User Manuals