This is my first try on Snowwolf products. After my trying on this Snowwolf Vfeng Kit, I couldn’t wait to share my ideas with you. You will be delighted to see it.

It’s packed in a black hat box with the three dimensional sketches of the box mod and the tank on it. There you will also see the logo of Snowwolf (a dimensional sketch of a wolf). On the back, there are also some basic information of the Snowwolf Vfeng Kit.


Inside of the package, it contains a tank, a vfeng mod, a spare glass tube, a RBA coil (surprise!),  a USB cable, a bag of accessories including two finished coils, a set of o-rings, a user manual, a warranty card, an instruction of Security Code and a certificate.


The tank is composed of five parts, drip tip, glass tube, coil head and the base. On both the top cap and the base, the are faceted designs which are convenient for screwing and unscrewing. The pre-installed coil head has a resistance of 0.2Ω. The best wattage to fit for this coil head is from 75w to 95w.

The spare RBA coil head inside of the package is smaller than the decks of the RBA atomizers in the market. However, it is very convenient to build the coils and there are also finished coils inside of the package.

The color scheme of Snowwolf Vfeng box mod is very unique. The one I have in my hand is in yellow and black. 

Also comes in other color schemes of blue and white, black and yellow.

Its fire button is in a hexagon shape with the logo of Snowwolf on it. Above it, there is an LED light. The OLED screen is below the fire button. The information displayed on it is not in black and white, instead, it’s colorful. It’s just like the comparison between color television and black-and-white television. In addition to the basic data of power (under power mode) and temperature (under temperature mode), there are also other data including puff times, resistance, voltage, vaping time of every time, energy bar and a watch! The two adjustment buttons and USB port are below the OLED screen.

On the opposite side, there is hollowed-cut with the brand name “Snowwolf”. The battery compartment is at the bottom with some venting holes on it. The 510 connector on the top is suitable for various atomizers in the market with no overhang when matching with a tank of 28mm diameter.

Press three times continuously, you will enter into the setting interface. Snowwolf Vfeng contains three modes including power mode, TC mode (including SS, TCR, Ti1 and Ni200), and TCR mode. You can also set the watch, the screen layout and the color of the LED light in different colors.


1. Its atomizer is convertible between tank and RDTA

2. 230w high power

3. Colorful OLED screen

4. Unique watch

5. Cool Appearance

6. Simple operation

SnowWolf Vfeng 230W Starter Kit Features & Spec:
Main material:Zinc alloy+SS
Display:1.30〞TFT color screen
Wattage range:10W-230W
Temperature range:100℃-300℃/200℉-570℉
Voltage input:6.4V-8.4V
Voltage output:1.0V-7.5V
Max output current:40A
Battery support: 2*18650 
Resistance range:0.05Ω-3.0Ω
Coil supporting:Kanthal/Titanium/Ni200/SS(304/316/317)/TCR
Charging support (USB):DC 5V/2.5A
Support USB charging

SnowWolf Vfeng 230W Starter Kit Package:
1 * SnowWolf Vfeng Mod(no battery cell)

1 * SnowWolf Vfeng Atomizer
1 * Glass Tube
1 * RBA Coil
1 * USB Cable
1 * Manual and Warranty Card.

If you are looking for a mod with fabulous appearance and high power, Snowwolf Vfeng Kit is a good choice for you. 

Any interest in this Snowwolf Vfeng Kit? Use coupon code vfeng12 to enjoy 12% off. Snowwolf Vfeng 230w box mod is also available at Urvapin. Use coupon code 12vfeng to save 12% off from Snowwolf Vfeng 230w box mod.